ICS 695GC-14 14 In. Concrete Saw
For over 20 years of innovation and experience culminating in the latest addition to our gas saw family. Everything that makes chain saws the preferable method in cutting concrete stone and masonry wrapped in a hungry power filled package called the 695GC and the 695F4. All the great features from past ICS chain saws plus a few new innovations to make your day go a little easier. Deep straight cuts and square corners with ease of use and dependable performance to match. If cutting concrete stone masonry or ductile iron pipe is your game the 695GC is your game changer.
Features:
- Use on concrete, stone and masonry
- Square corners
- Narrow deep cutting up to 14 in.
- Small openings
- 94 cc gas powered engine
- Safe, no gyroscopic rotation
Specifications
Engine Type: | 2-stroke, Air Cooled |
Displacement: | 5.7 cu-in (94 cc) |
Horsepower: | 6.4 hp (4.8 kW) @ 9000 rpm |
Torque: | 50.4 in-lbs (5.7 Nm) @ 7,200 rpm |
Engine Speed: | 9,300 +/- 150 rpm (max) 2,700 +/- 100 rpm(idle) |
Weight: | 21 lbs (9.5 kg) powerhead only |
Dimensions: | 18 in (46 cm) length 14 in (36 cm) height 12 in(30 cm) width |
Air Filter: | Water resistant polyester |
Carburetor: | Walbro RWJ-5A |
Starter: | Dust and water resistant |
Ignition: | Special water resistant electronic ignition |
Clutch: | Centrifugal, three shoe, three spring |
Fuel ratio: | 50:1 (2%) gasoline-to-oil |
Fuel Capacity: | 0.26 gallon (1 liter) |
Water Supply: | Minimum 20 psi (1.5 bar) |
Water Flow Minimum: | 2 gpm (8 lpm) |
Noise Level: | 112 dB(A) at 3 ft (1 m) |
Vibration Level: | 3.9 m/s2 (front handle) 4.1 m/s2 (rear handle) |
Engine Break-in Period: | One tank, without cutting, cycling throttle |
Spark Plug: | NGK BPMR7A or Champion RCJ6Y Ele |