Fittings

Access the drain pipe system to clear out clogs with the PVC Female Fitting Cleanout Adapter for Sewer and Drain (S&D) pipe. Spigot connects to...

The PVC Cleanout Plug enables access to sewer and drain (S&D) pipe systems to feed a plumbing snake into a clogged drain pipe. Attaches to, and...

The 4 in. PVC Tee adds a 90° branch to a 4 in. sewer and drain (S&D) pipe run, and connects three lengths of pipe. It also connects to select d...

The 4 in. PVC Elbow makes a 90° turn in 4 in. sewer and drain (S&D) pipe runs. The 90° Ell also connects to select drainage products compatible...

The 4 in. PVC Elbow makes a 45° turn in 4 in. sewer and drain (S&D) pipe runs. The 45° Ell also connects to select drainage products compatible...

Make a 22.5° turn in 4 in. sewer and drain (S&D) pipe runs with the PVC 22.5° Elbow. The 22.5° Ell also connects to select drainage products co...

Connect two lengths of 4 in. Sewer and Drain (S&D) pipes together with the 4 in. PVC S&D Coupling. This coupler also connects 4 in. S&D...

Repair broken pipe and stop leaks with the PVC S&D Slip Repair Coupling for 4 in. Sewer and Drain (S&D) pipes. The Slip Repair Coupling (al...

Seal the end of 4 in. Sewer and Drain (S&D) pipe with the 4 in. PVC S&D Cap. This cap is used to stop the flow of water at the end of the p...

The 4 in. PVC Wye adds a 45° angle to an existing 4 in. sewer and drain (S&D) pipe run and connects three lengths of pipe. It also connects to ...

Make precise turns in 4 in. sewer and drain (S&D) or 4 in. triple-wall pipe runs with the Swivel-Fit™ Variable-Angle Fitting. The unique fittin...

Connect 4 in. Sewer and Drain (S&D) pipe to 6 in. S&D pipe with the PVC S&D Increaser/Reducer Coupling. The coupler also connects 4 in....

Connect and align 2 in. X 3 in. rain gutter downspout to 4 in. Sewer and Drain (S&D) pipe with the PVC Offset Downspout Adapter. The offset des...

The PVC Downspout Adapter connects a 2 in. X 3 in. rain gutter downspout to 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe. The Downspout Ad...

Align and connect 3 in. X 4 in. rain gutter downspout to 4 in. Sewer and Drain (S&D) pipe with the PVC Offset Downspout Adapter. The offset des...

Add a branch to your irrigation system using the Insert Barb Tee X 1/2 in. MPT Adapter. This fitting has two 17mm barbed ends to connect to tubing ...

Add a branch to your irrigation system using the Insert Barb Tee X 1/2 in. MPT Adapter. This fitting has two 17mm barbed ends to connect to tubing ...

Secure two sections of 17mm supply tubing or dripline, or branch 17mm supply tubing from a 1/2 in., 3/4 in., or 1 in. main line with the 17mm Inser...

Connect tubing around corners using the 17mm Insert Barb Elbow. This fitting allows you to incorporate a 90° turn in your 17mm supply line. The stu...

The right solution for draining specific areas in your yard that are prone to flooding, the Flo-Well® Dry Well System is installed underground to c...

Extend the range of your irrigation system by adding a branch to your 17mm tubing or dripline with the 17mm Insert Barb Tee. The fitting connects t...