Exmark Turf Tracer S-Series TTS600GKA523E0 52 In. Walk-Behind Mower
Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks in 36-, 48-, and 52-inch widths. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.
Features:
- New Electric Clutch
- Hour Meter Comes Standard
- An eco-friendly, lower cost fuel reduces operating expenses versus typical gas-powered mowers
- Standard 9” x 3.5-4” smooth-tread, semi-pneumatic front caster tires virtually eliminate tire repair
- Patented Enhanced Control System (ECS)
- Full-floating UltraCut™ deck. Side discharge standard, with molded discharge chute and option to bag or mulch
Specifications
Equipment:
Steering Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn
Casters: .38" thick caster yoke arms
Front Caster Tires: 9 x 3.5-4, smooth-tread, semi-pneumatic
Drive Tires: 16 x 7.5-8, 4-ply Turf Master®
Safety Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Parking Brake: Lever-actuated mechanical compression
Electrical: 12-volt battery with 15-amp alternator
Standard Features: Engine hour meter
Power Components:
Engine Model: FS600V
Engine Brand: Kawasaki
Engine Series: V-Twin
Engine Speed: 3,600 rpm
Air Filter: Standard Engine Manufacturer's air filter
Drive Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\" (2.54 cm) tapered shafts
Speed: Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse
PTO Engagement: Electromagnetic 105 ft-lbs clutch
Fuel Capacity: 5-gallon (18.9-L) fuel tank.
Drive Wheel Release: Allows unit movement without engine running
Deck Lift: Manual lift with hairpin from hole to hole for position adjustment
Fuel System: Carbureted
Engine Displacement: 603
Engine HP: 18.5*
Drive: Hydro-Drive
Fuel Indicator: None
Carb Compliant: No
Fuel Type: Gas Carbureted
Engine Spec: _S27
Decks:
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch
Width / Cutting Deck: 52"
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength
Cutting Heights: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments
Blade Spindles: No maintenance, sealed and non-greaseable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver
Blade Tip Speed: Approximately 18,500 fpm.
Blades: 3 Blades at 18.00" Length
Dimensions:
Width: 64.3 in
Length: 75.9 in
Height: 42.0 in
WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and, which are know to the the State of California to cause birth defects or other reproductive harm. For more information, go to