Ir a contenido
FREE SHIPPING on online orders over $100!*
FREE SHIPPING on online orders over $100!*

Exmark Lazer Z E-Series LZE751GKA524A2 52 In. Zero Turn Mower

por Exmark
SKU LZE751GKA524A2
Disponibilidad:
Stock bajo
Precio original $14,873.00 - Precio original $14,873.00
Precio original $14,873.00
$14,873.00
$14,873.00 - $14,873.00
Precio actual $14,873.00

The perfect choice for professional landscaper who want the innovative and commercial-grade quality of a Lazer Z zero-turn riding mower, but in a value package. The Lazer Z E-Series zero-turn mower features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines, a Kohler® Command™ Pro, or a Vanguard V-Twin engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60, or 72-inch deck widths. Lazer Z E-Series zero-turn mowers come equipped with a full-suspension seat that enhances operator comfort, leading to less fatigue and increased efficiency.

Features:

  • Hydro Drive, Simplified- Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
  • Unibody Frame- Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
  • On-Board Diagnostics- Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Ultracut Series 4 Deck- This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Rear Discharge Deck- Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
Specifications
Starter Electric
Steering Control Hydraulically dampened twin levers; adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Caster Forks .50" thick caster yoke arms.
Front Caster Tires 13 x 5.0-6; smooth-tread; semi-pneumatic.
Drive Tires 23 x 9.50-12; 4 ply Super Turf
Parking Brake Lever-actuated disc brake.
Tractor Frame Unibody; welded; heavy-duty 1.5" x 3" tubular steel.
Blade Spindles No maintenance; sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Electrical 12-volt battery with 15-amp alternator.
Standard Features Engine hour meter and cup holder
Seat Deluxe; bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Transmission Speeds Infinitely Variable
Engine Brand Kawasaki
Engine Model FX751V
Engine Displacement 852
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward; 0–5.0 mph (8.1 kmph) reverse.
Transmission Hydrostatic
Engine Series V-Twin
Engine Spec FX751V-ES11-R
Engine Speed 3750 RPM
Drive Hydro-Drive
Fuel Capacity 12-gallon (45.4-L); single fuel tank with single fill location.
Air Filter Heavy-duty canister air filtration system
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses; 1.7-quart integrated reservoir; spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Fuel Type Gas Carbureted
PTO Engagement MagStop electromagnetic 175-ft-lb clutch with spot brake
Fuel Indicator Yes - electronic Sender
Drive Wheel Release Allows unit movement without engine running.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles; or place in transport position.
Carb Compliant No
Safety Package Operator Presence Controls (OPC) and drive system interlock; with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard; with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Deck Construction 10-gauge top that is formed and continuously seam welded; 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blade Tip Speed Approximately 18500 fpm.
Blades 3 Blades at 18.00" Length
Width 64.8 in. (164.6 cm)
Height 70.5 in. (179.1 cm)
Length 79.2 in. (201.2 cm)
Curb Weight 1136

⚠ #2 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and, which are know to the the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.