Skip to content
FREE SHIPPING on online orders over $100!*
FREE SHIPPING on online orders over $100!*

Exark Lazer Z S-Series LZS801CKA72RA1 72 In. Zero Turn Mower

by Exmark
SKU LZS801CKA72RA1
Availability:
Typically available in 5-10 business days. Manufacturer lead times may vary.
Original price $18,980.00 - Original price $18,980.00
Original price
$18,980.00
$18,980.00 - $18,980.00
Current price $18,980.00

With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCutâ„¢ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders and machine health status.

Features:

  • This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers
  • Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites
  • And, full-floating, 4-point suspension with four adjustable anti-scalp rollers
  • Fewer Grease Points
  • Deck and hydro belt can be installed without using any tools
  • Gas-powered S-Series models have a single 12-gallon tank with one fill location
  • Check vital functions at a glance on the digital screen
  • This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts
Specifications

Equipment:
Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver
Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions
Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic
Parking Brake: Lever-actuated disc brake
Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up
Electrical: 12-volt battery with 15-amp alternator
Standard Features: Engine hour meter and cup holder

Power Components:
Engine Brand: Kawasaki
Engine Model: FX801V
Engine Displacement: 852
Engine Series: V-Twin
Engine Speed: 3,750 RPM
Air Filter: Heavy-duty canister air filtration system
Fuel Type: Gas Carbureted
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location
Fuel Indicator: Yes - electronic Sender
Drive: Hydro-Drive
Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors
Speed: Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse
Carb Compliant: Yes
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release: Allows unit movement without engine running
Casters: .50" thick caster yoke arms
Engine Spec: _S04

Decks:
Width / Cutting Deck: 72"
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch
Deck Construction: 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades: 3 Blades at 24.50" Length

Dimensions:
Width: 78.2 in
Length: 86.1 in
Height: 70.5 in

⚠ #2 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and, which are know to the the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.